Aftermarket BFT Remote
Includes:
1x Aftermarket BFT Remote
1x Battery
Coding Instructions
Compatibility:
Gate Openers
BFT ARES ULTRA BT A1500
BFT ARES ULTRA BT A1000
BFT DEIMOS BT A400
BFT DEIMOS BT A600
BFT DEIMOS ULTRA BT A400
BFT DEIMOS ULTRA BTA 600
BFT GIUNO ULTRA BT A50
BFT ICARO SMART 2000
BFT PHOBOS BT A40\
BFT SP3500 TRI 400
The BFT Mitto 4B is suitable for use on gate openers operated by the below remote controls.
Gate Remote Controls
BFT MITTO2
BFT MITTO4
BFT MITTO2A
BFT MITTO4A
BFT B RCB02
BFT B RCB04
BFT KLEIOB RCA04
BFT TRC1/TRC2/TRC4
PLEASE NOTE - If you are not 100% sure this remote is compatible with your motor, please send us a picture of your motor/remote and we will be able to advise you.
Includes:
1x Aftermarket BFT Remote
1x Battery
Coding Instructions
Compatibility:
Gate Openers
BFT ARES ULTRA BT A1500
BFT ARES ULTRA BT A1000
BFT DEIMOS BT A400
BFT DEIMOS BT A600
BFT DEIMOS ULTRA BT A400
BFT DEIMOS ULTRA BTA 600
BFT GIUNO ULTRA BT A50
BFT ICARO SMART 2000
BFT PHOBOS BT A40\
BFT SP3500 TRI 400
The BFT Mitto 4B is suitable for use on gate openers operated by the below remote controls.
Gate Remote Controls
BFT MITTO2
BFT MITTO4
BFT MITTO2A
BFT MITTO4A
BFT B RCB02
BFT B RCB04
BFT KLEIOB RCA04
BFT TRC1/TRC2/TRC4
PLEASE NOTE - If you are not 100% sure this remote is compatible with your motor, please send us a picture of your motor/remote and we will be able to advise you.
Includes:
1x Aftermarket BFT Remote
1x Battery
Coding Instructions
Compatibility:
Gate Openers
BFT ARES ULTRA BT A1500
BFT ARES ULTRA BT A1000
BFT DEIMOS BT A400
BFT DEIMOS BT A600
BFT DEIMOS ULTRA BT A400
BFT DEIMOS ULTRA BTA 600
BFT GIUNO ULTRA BT A50
BFT ICARO SMART 2000
BFT PHOBOS BT A40\
BFT SP3500 TRI 400
The BFT Mitto 4B is suitable for use on gate openers operated by the below remote controls.
Gate Remote Controls
BFT MITTO2
BFT MITTO4
BFT MITTO2A
BFT MITTO4A
BFT B RCB02
BFT B RCB04
BFT KLEIOB RCA04
BFT TRC1/TRC2/TRC4
PLEASE NOTE - If you are not 100% sure this remote is compatible with your motor, please send us a picture of your motor/remote and we will be able to advise you.
Coding Instructions
Programming of your new Remote control Receiver with Digital screen
1. Press the “OK” button on your receiver twice. The screen displays “PARA”.
2. Press the “-” button on your receiver twice. The screen displays “RADIO”.
3. Press the “OK” button on your receiver once. The screen displays “ADJ STRT”.
4. Press the “OK” button on your receiver once. The screen displays “Hide Button”.
5. Press both buttons on your new remote control at the same time. Keep them pressed down. The screen displays “Released”.
6. Let the buttons go. The screen displays “Desired Button”.
7. Press a button on your new remote control. The screen displays “OK”.
8. Wait 10 seconds.
9. Your new remote control is programmed.
Programming of your new Remote control Receiver without Digital screen
1. Open the casing of your receiver. It is located next to your motor.
2. On the receiver circuit board, press the programming button (SW1). The LED light of the receiver blinks. Let the button go.
3. Press both buttons on your new remote control at the same time. Let them go. The LED light of the receiver remains lit fixedly.
4. Press the left button on your new remote control. Let it go. The LED light of the receiver blinks.
5. Wait 5 seconds. The LED light of the receiver turns off.
6. Repeat this procedure for the right button of your new remote control. This time, use the programming button SW2.
7. Wait 10 seconds.
8. Your new remote control is programmed.
Programming via existing coded remote
Locate a remote already coded to & working the device. Be within 3 meters of the gate control box. Original Remote: Press hidden button on back of remote with a pin or paper clip OR press Button 1 & 2 together until remote LED lights. Original Remote: Momentarily press button that opens device.
This puts the device receiver into learning Mode
New Remote: Press hidden button on back of remote with a pin or paper-clip or press buttons 1 & 2 together until remote LED lights.
This teaches the receiver the additional code to remember