CSI Classic CSI-1 Pro Series Genuine Remote
Includes:
1x remote
1x Battery
Coding Instructions
Compatibility:
CSI Classic CSI-1
Features:
Transmitter Frequency: 433 MHz
Battery: CR2032
Control up to 4 doors
Includes:
1x remote
1x Battery
Coding Instructions
Compatibility:
CSI Classic CSI-1
Features:
Transmitter Frequency: 433 MHz
Battery: CR2032
Control up to 4 doors
Includes:
1x remote
1x Battery
Coding Instructions
Compatibility:
CSI Classic CSI-1
Features:
Transmitter Frequency: 433 MHz
Battery: CR2032
Control up to 4 doors
How to Program new CSI Remotes to your CSI Opener
NOTE: Hand transmitters that are supplied with the door opener are pre-programmed.
1. Press the CODE button. A dot will illuminate in the corner of the display.
2. On the NEW transmitter, press the button you wish to activate your opener, pause for 2 seconds and then press the same button for 2 seconds. The dot on your display will flash to confirm that it has accepted the remote. After 10 seconds the LED light will turn off.
3. Repeat this process for any additional remotes that need to be programmed.
How to Clear the Memory of your CSI Opener
1. Press and hold CODE button until a C is indicated on the display. All stored remotes will be deleted.