ATA Genuine PTX-6v1
Includes:
1x ATA PTX-6v1 Remote
1x Battery
Coding Instructions
Compatibility:
Roller Door Openers
GDO-6v3 EasyRoller
GDO-6v4 EasyRoller
GDO-8v3 Shedmaster
GDO-10v2 Toro
GDO-10v3 Toro
GDO-12 Hiro
Sectional Door Openers
GDO-7v2 SecuraLift
GDO-7v3 SecuraLift
GDO-9v2 Enduro
GDO-9v3 Dynamo
GDO-11v1 Ero
GDO-11v3 Ero
Tempo ATS-2
Synchro ATS-3
Gate Openers
NES-24v1 NeoSlider
NES-24v3 NeoSlider
NES-500 NeoSlider
NES-800 NeoSlider
DCB-05 Gate Controller
SGO-1 Elite
PLEASE NOTE - If you are not 100% sure this remote is compatible with your motor, please send us a picture of your motor/remote and we will be able to advise you.
Includes:
1x ATA PTX-6v1 Remote
1x Battery
Coding Instructions
Compatibility:
Roller Door Openers
GDO-6v3 EasyRoller
GDO-6v4 EasyRoller
GDO-8v3 Shedmaster
GDO-10v2 Toro
GDO-10v3 Toro
GDO-12 Hiro
Sectional Door Openers
GDO-7v2 SecuraLift
GDO-7v3 SecuraLift
GDO-9v2 Enduro
GDO-9v3 Dynamo
GDO-11v1 Ero
GDO-11v3 Ero
Tempo ATS-2
Synchro ATS-3
Gate Openers
NES-24v1 NeoSlider
NES-24v3 NeoSlider
NES-500 NeoSlider
NES-800 NeoSlider
DCB-05 Gate Controller
SGO-1 Elite
PLEASE NOTE - If you are not 100% sure this remote is compatible with your motor, please send us a picture of your motor/remote and we will be able to advise you.
Includes:
1x ATA PTX-6v1 Remote
1x Battery
Coding Instructions
Compatibility:
Roller Door Openers
GDO-6v3 EasyRoller
GDO-6v4 EasyRoller
GDO-8v3 Shedmaster
GDO-10v2 Toro
GDO-10v3 Toro
GDO-12 Hiro
Sectional Door Openers
GDO-7v2 SecuraLift
GDO-7v3 SecuraLift
GDO-9v2 Enduro
GDO-9v3 Dynamo
GDO-11v1 Ero
GDO-11v3 Ero
Tempo ATS-2
Synchro ATS-3
Gate Openers
NES-24v1 NeoSlider
NES-24v3 NeoSlider
NES-500 NeoSlider
NES-800 NeoSlider
DCB-05 Gate Controller
SGO-1 Elite
PLEASE NOTE - If you are not 100% sure this remote is compatible with your motor, please send us a picture of your motor/remote and we will be able to advise you.
Coding your Remote into the Opener
1. Depending on the motor, press and hold the DOOR CODE button or the SW1 / SW2 button.
2. Press one of the buttons on your remote for two seconds and then release.
3. Press the same button on your remote again for two seconds and then release.
4. Let go of the DOOR CODE, SW1 or SW2 button.
Deleting the Codes from your Opener
1. Turn off your opener at the power point.
2. Depending on the motor, press and hold the door code button or the SW1 / SW2 button.
3. Turn the power point to the opener back on.
4. After 15 seconds release the door code, or SW1 / SW2 button.
5. Test your remotes to make sure they no longer operate the opener.